Linksys Extender Setup

Linksys RE6300 Extender Set helps in providing high-speed internet in your dead zones. Linksys RE6300 AC750 with the help of a browser can be Setup

Before starting the process of Linksys RE6300 Extender just note down your SSID and Password of your Router.

Linksys Extender RE6300 should be plugged into a power outlet. Once you see the blinking orange light then start the RE6300 setup process.

• Firstly, through a computer or a cell phone, connect your device to the Linksys range extender’s default SSID, which is Linksys Extender Setup – xxx.

IMP: The xxx represents Linksys RE6300’s MAC address.

• In the Address Bar type “https://extenderlinksyssetup.com/how-to-setup-linksys-re6300/” / extender.linksys.com or “192.168.1.1“.
• Once the RE6300 setup page opens up, select between “Range Extender and Access Point”.

• So it will show all the available WiFi networks, choose your Home WiFi Network.
• Punch in your Router’s WiFi password and click next.
• Also here in this step, you can change your Linksys RE6300 Extenders Network Name.
• Spot finder will indicate a perfect location for you RE6300 Linksys Range Extender.
• Create Password for your Extender.
• Lastly, register your product by typing your email.
• Your Linksys RE6300 is all set up now.

SPECIFICATIONS

TECHNICAL DETAILS

How do I install Linksys RE6300 WiFi extender?

With the Linksys extender setup re6300 reset WiFi Extender’s browser-based setup feature, it is simple to get it up and running. The use of installation software or a setup CD is not required.

Before you begin, consider the following:

• Check to see if your WiFi connection is still operational.
• Check to see that the range extender is within range of the router before proceeding.
• You know the name of your WiFi network as well as the password or security key associated with it. All of these options are case-sensitive. Instructions on how to check your WiFi settings can be found by clicking on this link.
• The Linksys RE6300 should be plugged into a power outlet at all times during operation. Wait until the light on the range extender begins to blink orange before attempting to configure it.

Please keep in mind that the images below may differ depending on the firmware version of your range extender.