Linksys Extender Setup

If you’re looking for a way to extend your home Wi-Fi network, the Linksys RE6700 extender could be the solution you’re looking for. This powerful device allows you to boost the signal strength of your existing Wi-Fi network and cover those hard-to-reach areas of your home or office. In this article, we’ll walk you through the step-by-step process of setting up the Linksys RE6700 extender using WPS and the web-based method. We’ll also cover how to reset the device, update the firmware, and set it up as an access point.

Setting up the Linksys RE6700 Extender using WPS

One of the easiest ways to set up the Linksys RE6700 extender is by using the WPS method. This method requires that your router supports WPS, which stands for Wi-Fi Protected Setup.

Step 1: Plug in the Linksys RE6700 Extender

Before you begin, make sure that the Linksys RE6700 extender is properly plugged into an electrical outlet and is within range of your existing Wi-Fi network.

Step 2: Press the WPS Button on the Linksys RE6700 Extender

Locate the WPS button on the Linksys RE6700 extender and press it for at least 5 seconds. The LED light on the extender should start blinking.

Step 3: Press the WPS Button on Your Router

Within 2 minutes of pressing the WPS button on the Linksys RE6700 extender, press the WPS button on your router. The LED light on the extender should turn solid green, indicating a successful connection.

Step 4: Connect to the Extended Wi-Fi Network

Once the connection is established, use a wireless device to connect to the extended Wi-Fi network. The extended network name will be the same as your existing Wi-Fi network, but with “_EXT” added to the end of the name.

Setting up the Linksys RE6700 Extender using the Web-Based Method

If your router does not support WPS, you can still set up the Linksys RE6700 extender using the web-based method. Here’s how:

Step 1: Connect to the Linksys RE6700 Extender

Use a computer or mobile device to connect to the default Wi-Fi network of the Linksys RE6700 extender, which should be named “Linksys Extender Setup”.

Step 2: Open a Web Browser

Open a web browser and type “http://extender.linksys.com” in the address bar.

Step 3: Create an Account

If you do not already have a Linksys account, create one by following the on-screen instructions.

Step 4: Follow the Setup Wizard

Once you’ve created an account, the Linksys RE6700 extender setup wizard will guide you through the process of setting up the extender. Follow the on-screen instructions to complete the setup process.

How to Reset the Linksys RE6700 Extender

If you need to reset the Linksys RE6700 extender to its default factory settings, here’s how:

Step 1: Locate the Reset Button

Locate the reset button on the Linksys RE6700 extender. It is usually located on the side or on the bottom of the device.

Step 2: Press and Hold the Reset Button

Using a paperclip or a similar object, press and hold the reset button for at least 10 seconds.

Step 3: Wait for the Device to Reset

After you release the reset button, wait for the Linksys RE6700 extender to reset itself. This may take a few minutes. Once the device has reset, it will return to its default factory settings.

How to Update the Firmware on the Linksys RE6700 Extender

Updating the firmware on your Linksys RE6700 extender can help improve its performance and fix any bugs or security vulnerabilities. Here’s how to update the firmware:

Step 1: Download the Firmware

Go to the Linksys Support website and download the latest firmware for your Linksys RE6700 extender.

Step 2: Connect to the Linksys RE6700 Extender

Use a computer or mobile device to connect to the Wi-Fi network of the Linksys RE6700 extender.

Step 3: Access the Web-Based Interface

Open a web browser and type “http://extender.linksys.com” in the address bar. Enter your login credentials to access the web-based interface.

Step 4: Update the Firmware

In the web-based interface, go to the “Administration” tab and select “Firmware Upgrade”. Click the “Choose File” button and select the firmware file that you downloaded in Step 1. Click “Start Upgrade” to begin the firmware update. Do not turn off the device or disconnect it from the network during the firmware update process.

How to Set Up the Linksys RE6700 Extender as an Access Point

If you want to use the Linksys RE6700 extender as an access point, follow these steps:

Step 1: Reset the Linksys RE6700 Extender

Reset the Linksys RE6700 extender to its default factory settings by following the instructions above.

Step 2: Connect the Linksys RE6700 Extender to Your Router

Use an Ethernet cable to connect the Linksys RE6700 extender to your router.

Step 3: Access the Web-Based Interface

Open a web browser and type “http://extender.linksys.com” in the address bar. Enter your login credentials to access the web-based interface.

Step 4: Change the Mode to Access Point

In the web-based interface, go to the “Wireless” tab and select “Basic Settings”. Change the “Wireless Mode” to “Access Point” and click “Save Settings”.

Step 5: Configure the Access Point

Configure the access point settings, such as the network name (SSID) and security settings, to match your existing Wi-Fi network.

Conclusion

Setting up the Linksys RE6700 extender may seem daunting, but it doesn’t have to be. By following our step-by-step guide, you can get your extender up and running in no time. Whether you choose to set it up using WPS or the web-based method, or want to use it as an access point, we’ve got you covered. Remember to update the firmware regularly to ensure optimal performance, and enjoy the extended Wi-Fi coverage throughout your home or office.