Linksys Extender Setup

Setting up the Linksys WHW0103 Velop mesh Wi-Fi system can seem like a daunting task, but with a bit of guidance, you’ll have it up and running in no time. This guide will walk you through each step, ensuring you get the best performance from your Linksys Velop Setup.

Unboxing and Preparing for Setup

Before diving into the setup, let’s start with the basics: unboxing and getting everything ready.

1. Three Velop nodes
2. Ethernet cables
3. Power adapters
4. Quick start guide

Setting Up Your Linksys Velop System

Now, let’s get down to business: the actual setup. Follow these steps closely.

Step 1: Download the Linksys App

First things first, download the Linksys app on your smartphone. It’s available on both iOS and Android.

Step 2: Connect the First Node

1. Plug in your first node near your modem using the provided Ethernet cable.
2. Connect the power adapter and wait for the light to flash blue.
3. Open the Linksys app and follow the on-screen instructions.

Step 3: Add More Nodes

Once the first node is set up, the app will guide you through adding additional nodes. Place them strategically around your home for optimal coverage.

Logging In and Managing Your Network

Once your Linksys Velop setup is complete, logging into your system is straightforward.

How to Log In?

1. Open the Linksys app.
2. Enter your account credentials.
3. You’ll see your network status and be able to manage settings.

Resetting Your Linksys Velop

Sometimes, you might need to reset your Velop system, maybe to fix connectivity issues or start fresh.

How to Reset?

1. Locate the reset button on the bottom of the node.
2. Press and hold it for 10 seconds until the light turns red.
3. Release the button and wait for the node to reboot.

Updating Firmware

Keeping your firmware updated is crucial for security and performance.

How to Update Firmware?

1. Open the Linksys app.
2. Go to “Network Administration.”
3. Check for available updates and follow the prompts to install them.

Using the Linksys Velop as an Access Point

You can also use your Velop system as an access point to extend your existing network.

Setting Up as an Access Point

1. Connect a node to your router via Ethernet.
2. Open the Linksys app and select “Use as Access Point.”
3. Follow the instructions to complete the setup.

FAQs

This comprehensive guide should help you navigate through the setup and maintenance of your Linksys WHW0103 Velop system with ease. Happy surfing!

Also Read- Login Linksys Router