Many people throughout the world are unable to connect to their extender network because their Linksys extender is not broadcasting their SSID. There could be several reasons why your Linksys Extender SSID isn’t showing; let’s go over all of them so you can solve the problem. Let’s get started:
Reasons for Linksys Extender Not Broadcasting SSID
1. Your extender is not properly positioned.
It has discovered that if your Linksys extender put in a remote location and not receiving WiFi signals from the current extender, it will not appear in the list of available WiFi networks. As a result, position your extender in an area where it can easily obtain WiFi signals from the router.
2. Your extender obstructed by obstacles.
If there are any WiFi-interfering devices between your extender and router. You may also encounter the Linksys extender not broadcasting SSID issue. Simply, keep your router and extension out of reach of such gadgets by placing them in a higher area to resolve the issue. Mounting the extension in the middle of a wall can also assist to avoid signal interference. Which commonly produced by electrical equipment, metal appliances, Bluetooth speakers, aluminium studs, reflective surfaces, and so on.
3. Verify the network connectivity.
Linksys Extender Not Broadcasting SSID can also caused by faulty connections. To accomplish this, ensure that your Linksys extender and router properly connected to their respective power outlets and have an adequate power supply.
4. Check the setup twice.
Check that you have completed the Linksys extender configuration correctly. If your extender is only partially or incorrectly setup, the Linksys Extender Not Broadcasting SSID error can arise and disrupt your internet experience.
5. Update your system’s WiFi network drivers.
Your system can communicate with your WiFi and network adapters thanks to the wireless network driver. If your Extender isn’t showing up as an SSID on your PC, it could be due to outdated or corrupted WiFi network drivers.
6. Modify the wireless channel.
If you believe that other devices are interfering with the signals of your Linksys extender, changing the wireless channel is a simple yet effective technique to lessen such interference, which should also resolve the SSID not appearing issue for you.
How to Repair a Linksys Extender That Isn’t Broadcasting an SSID
If the reasons listed above are not the cause of the SSID not appearing issue, try the troubleshooting techniques below to see if you can get it fixed.
- To begin, restart the extender. Check that when you plug in the extender and switch it on, it displays green LED lights.
- Once you’ve connected the extender wirelessly to your network, it’s time to select a hardware option. Connect the two devices using an Ethernet wire.
- Bring the WiFi extension closer to the router. Check to see whether your device’s WiFi network option is hidden. Though masking a WiFi network is an efficient approach to protect your internet from potential attacks, it may result in the Linksys Extender not showing up as an SSID on a device.
- If all of your troubleshooting efforts have been futile and you are unable to resolve the issue, perform a Linksys extender reset. There could be an issue with the device’s installation that you are not aware of.
That’s all there is to it. Please let us know which approach you used to resolve the Linksys Extender Not Broadcasting SSID problem. If your Linksys WiFi network still does not appear in the network list and you are unable to resolve the issue, please contact our technical specialists for immediate assistance.
Related Posts
Configuring a Linksys WIFI Extender: A Comprehensive Guide
28 May 2024 0Why is my Linksys RE6500 WiFi Range Extender disconnecting so frequently?
12 Jan 2022 0How Do You Setup Linksys RE1000 Wireless Range Extender?
12 Jan 2022 0