Linksys Extender Setup

Linksys WiFi range extender has successfully turned dead zones into fun zones while also enhancing current WiFi signals. These little devices improve the signal strength from your router, allowing all of your connected devices to access the internet even in remote regions. While the Linksys RE6500 has a lot of great capabilities, it can also make users’ heads spin with numerous troubles. Among others, Linksys RE6500 keeps disconnecting is one of the most common.

Don’t worry if you’re having trouble with the same problem. We absolutely comprehend your predicament. That’s why, to save you time and effort, we’ve put together this guide to assist you in quickly resolving the WiFi connectivity issue.

however, there is usually a reason for each difficulty, and Linksys RE6500 is no exception to this rule. There are a number of circumstances that can hinder you from fully utilizing your Linksys WiFi. Let’s take the leap and discuss the causes of the problem, as well as possible solutions.

Reasons for Linksys RE6500 disconnecting

Reason1: The first reason is that you don’t have enough WiFi signal. If your WiFi network data are at the limit, the problem can be aggravating.

Solution: Check to see if your WiFi data bundle hasn’t reached its maximum. If that’s the case, you’ll need to update your WiFi plan.

Reason2: You are experiencing wifi interference. This can happen if the channel you’re on is shared with others, or if your WiFi is being hampered by neighboring electronic gadgets. Microwave ovens, refrigerators, cell phones, baby monitors, Bluetooth gadgets, and other items fall within this category.

Solution: Keep your Linksys RE6500 extender away from any gadgets that could interfere with it. Also, when doing the Linksys WiFi setup, consider positioning your WiFi device on a higher shelf so that it can catch signals from your existing router and broadcast them to your connected devices without interference.

Reason3: If your WiFi is overloaded, you may experience a WiFi constant disconnect issue. You may have a variety of devices linked to your network.

Solution: For example, if your extender allows 20 devices at a time and you have connected more than that, the Linksys device will be unable to offer the internet to all of your devices properly, resulting in WiFi dropping. So, according to the number of compatible devices, connect devices to your WiFi.

Reason4: Your extenders and the router’s software versions may be out of date, which might cause the internet to drop.

Solution: To enjoy the additional capabilities as well as update the ones your WiFi version already has, you must update the firmware of your devices. If your Linksys RE6500 frequently loses connection, you should call our skilled experts to update the firmware version of your equipment.

Reason5: You may have set up your Linksys WiFi extender incorrectly.

Visit here if you don’t know how to install your Linksys Extender via http://extender.linksys.com.

Bonus Tip: Before following the procedures above, verify with your ISP to see if you have proper WiFi. It’s also possible that the problem stems from your ISP’s end.

Verdict.

However, We understand how inconvenient it is to have your Internet connection go down. We hope that this article will assist you in quickly resolving the ‘Linksys RE6500 constantly dropping internet’ issue. If the above procedures don’t work for you, please contact us for more information.

That’s why Our professionals are available to assist you whenever you need them. See you around!