Linksys Extender Setup

In case Resolve Corrupt Firmware on Linksys Router your router’s firmware gets corrupted that doesn’t mean you will have to buy a new router. Once you find the power LED blinking continuously on the router that means your router’s firmware is corrupted. You can simply go ahead and update the firmware or you can run some common diagnostics like-

Steps Resolve Corrupt Firmware on Linksys

• Powercycle the router
• Assign a static IP address for the computer
• Reset the router
• Ping the router
• How to power cycle the router
  This is the most common solution for most of the problems related to your routers. It hardly requires 30 seconds of your time. What you need to do is unplug the router for around 30 seconds and you call also remove other cables too like the ethernet chord and Internet chord.
• Assign a static IP Address to your computer
  Since DHCP is not working on the router you will have to assign a static IP address to your connected computer.
• Reset the router
  You need to press and hold the factory reset button on your router for around 30 seconds. Depending upon the model number of Linksys router you have can find the reset hole either in the back or at the bottom. After this unplug the router for 10 seconds and plug it back in.
• Ping the router
  You can do the Ping test to check the connection between the router and the computer. During ping, the test computer sends the signal to the router and in return, it sends back packets.

To Resolve Corrupt Firmware on Linksys , a particular record should be downloaded from the Internet and transferred to the gadget. Firmware redesigns can fix programming bugs, further develop includes, and broaden the existence of the gadget. These upgrades can profit the general exhibition of a gadget. At the point when a firmware overhaul has applied the interchanges of the switch stop for a brief time.