In this article, we will discuss with you what do the lights mean on Linksys extender?

I. Status light- In this, there are three status lights for your Range Extender.

Firstly, Main Light- This is the light directly on the top front of your Range Extender.
Secondly about, OFF- It means the Range Extender isn’t getting power. And is turned off.
Solid Green: – It refers turned on, with good signal strength.
Blinking Green- Booting up or updating firmware.
Blinking Orange –It implies being ready for setup or not connected.
Finally, Solid Orange – Solid orange light indicates the weak signal from your router to the Range Extender. Move the Range Extender closer to the router.

II. Moreover WPS Light – The WPS light is on the side of the Range Extender

Solid Orange – In it Range Extender is trying to create a WPS connection to your Router.
Off – It means the WPS wasn’t able to connect.

III. Furthermore Ethernet Ports

In it, each Ethernet port on the back of your Range Extender has a small light.
Off- It implies no cable is connected, or the device can’t be found over the Ethernet cable.
Solid Green- Solid green light means the connection to the other device is good.
Then, Blinking Green- Indicates the data is going over the connection.
Data is going over the connection.